Home Forums Discussions General Discussion how do I reprint a lab order?

Richard,

OK, here is the deal. When you do an order, on the right hand side you will the fields "Name" and "To"

It is the number of these fields in a column which determines how many orders you will have to print to equal what you ordered in the first place.

So, if you choose the Labs tab and then check off what labs you want, each one will give you another line in the column. See JPG #1 So, if you check three boxes for each lab or set of labs you want, you will get that many fields. Now you could check a box and then add labs in the comment section, and it will only count as one.

You are better off doing custom. You can use a template or type them in and you will only get one field (Name and To) on the right. See #2 for list of labs.

You can type a thousand labs, but the only thing that will show up on the right will be the word "Custom," meaning only one Order to print off if you need to print again. See #3.

So, keep that in mind. For each check you use in the Lab section, that will be how many lab fields which will show up and need to be printed. Each check box and the corresponding lab or labs it corresponds to makes its own field and is counted as one lab sheet.